This article outlines the effect of adding Al2O3 and Cu nanoparticles to water and measuring the thermal conductivities and viscosities of the mixtures. The effect of pH was taken into account and it was found that there are optimal pH values for each of the nanoparticle mixtures that give the highest thermal conductivities and lowest viscosities. Research shows that thermal conductivity and viscosity are closely related to each other. ...
Using the TPS method, the authors measured the thermal conductivity and thermal diffusivity of samples of Swedish wood. They also looked at the effect of density, porosity and anisotropy on the measured thermal properties. Both longitudinal and transverse measurements were taken at temperatures ranging from 20°C to 100°C and an increase in temperature resulted in a slight increase in thermal conductivity. The types of mechanisms that lead to heat conduction ...
A collection of AlSi7 foams (porosities 0.5 to 0.8) were analyzed using the TPS technique in order to determine thermal conductivity. Increased density was found to lead to increased thermal conductivity. The TPS technique was found to be sensitive to the in-homogeneities created from the foaming process; therefore the foaming process is an important factor in the determination of thermal conductivity of a given foam. The authors also combined several theoretical models ...
The authors of this article look to use shredded waste tires as a component of a cement composite in order to reuse the discarded material as well as improve the thermal properties of the composite. The TPS method was used in order to determine thermal conductivities of the dry components of the composite, and the auto-coherent homogenisation model was used to determine the thermal conductivity of the rubber/cement/air ...
A novel technique was used in this research article, to introduce a hybrid mesh to a polymer composite within bipolar plates, for proton exchange membrane fuel cells (PEMFCs). The mesh added was copper or aluminum based, to allow for an increased thermal conductivity of the PEMFCs. Experimental testing confirms this theory, as the copper-meshed hybrid polymer composite showed a thermal conductivity of 30.0 W/mK, while the aluminum-meshed hybrid polymer composite ...
