This study aimed to enhance the thermal and mechanical properties of polyethylene (PE)/boron nitride (BN) composites by manipulating the BN concentrations in the matrix and by applying shear fields in laminating-multiplying elements (LMEs). A thermal constants analyzer measured the thermal conductivity of the PE/BN composites using the transient plane source (TPS) method. Results showed that the thermal conductivity of the composites increased with BN concentration. As well, the ...
Surfactants are often used in nanofluids to help improve dispersion and prevent aggregation of the resident nanoparticles. In this study, the researchers used the transient plane source (TPS) technique to measure the thermal conductivity of a variety of nanofluids with different surfactants of varying concentrations, at different temperatures and pH values. For surfactants, thermal conductivity stabilizes after the addition of a certain concentration of that surfactant. Strongly acidic and alkaline ...
A series of Al2O3-water nanofluids were synthesized and their thermal conductivities were evaluated under different pH values and concentrations of surfactant (SDBS) using the Thermal Constants Analyzer. All the properties studied were found to have a strong effect on the measured thermal conductivity. By using the procedure listed in the report, the thermal conductivity of Al2O3-water nanofluids can be increased by 10% with the use of only 0.0015 ...
Glass components recovered from dismantled cathode ray tubes (CRTs) are very difficult to recycle or reuse and so other methods of using these glass components must be found to prevent environmental problems. Through the mixing of the recovered glass with calcium carbonate powder, glass foams can be synthesized that have applications in thermal and acoustic insulation. The various effects on the sintering process such as heating rate and holding time ...
The field of nanofluids is relatively new, however researchers in this article aimed to research their thermal conductivity and dispersion behaviours. A nanofluid consists of free-floating, solid nanoparticles suspended in a base fluid. Specifically, Al2O3-H2O nanofluids were investigated in this study. Using a thermal constants analyzer, the thermal conductivities of various modifications of nanofluids were measured. Research concluded that pH and concentrations of SDBS dispersants have a ...
