Thermal Conductivity Paper Database

Search academic papers below:

Recommended Papers for: Carbon Fiber

Total Papers Found: 6

Synergistic improvement of thermal conductivity in polymer composites filled with pitch based carbon fiber and graphene nanoplatelets

It was found that the thermal conductivity of composite materials is enhanced by the simultaneous incorporation of dispersed pitch-based carbon fibers (PCFs) and graphene nanoplatelets (GNPs). This study investigated methods for optimizing thermal conductivity. A thermal conductivity analyzer was used to compare thermal conductivity of ...

Author(s): ,

Effect mechanism of mixing on improving conductivity of asphalt solar collector

Asphalt solar collector (ASC) is a conductive asphalt concrete and an eco-friendly method to de-ice roadways. This study examined if the addition of conductive fillers and various mixing parameters could improve the thermal conductivity and energy efficiency of ASC. A thermal conductivity system measured the ...

Author(s): , , , ,

Thermal conductivity models for single and multiple filler carbon/liquid crystal polymer composites 

Adding conductive fillers to polymer resins improves the thermal conductivity of the polymers. In this study, Thermocarb TC-300 synthetic graphite and Fortafil 243 carbon fiber were added to Vectra A950RX liquid crystal polymer (LCP) to produce anisotropic single and multiple filler composites. A Thermal Constants ...

Author(s): , , ,

Thermal Properties of Magnetite Nanoparticle and Carbon Fiber Doped Epoxy Shape Memory Polymer

Carbon fiber and magnetite (Fe3O4)-doped epoxy memory shape polymers were prepared with 2.5% volume fraction of each dopant. These materials were doped in the hope of increasing the thermal performance of the polymers. Using the Thermal Constants Analyzer, thermal conductivity, thermal diffusivity and specific ...

Author(s): , , ,

Carbon fiber reinforced carbon aerogel composites for thermal insulation prepared by soft reinforcement

In order to improve the brittleness and shrinkage experienced by carbon aerogels during the drying process, carbon fibers were added to the aerogel. Supercritical drying was used in order to generate the aerogels, and a machine was used to measure the thermal conductivity of the ...

Author(s): , ,