Using a combination of transient plane source (TPS) technique and slug calorimetry, 4 commercially available fire resistive materials (FRMs) are studied from room temperature to 1000°C. The materials studied in this report are two gypsum-based and two calcium-silicate based materials. These materials are heterogeneous and thus when heated to elevated temperatures, the microstructure of the materials may be compromised and various reactions and phase changes may take place over the course ...
Two calcium silicate boards of different densities, porosities and pore size were analyzed for their thermal properties, specifically thermal conductivity. The boards were heated from room temperature to 400°C and the thermal conductivity was monitored during this time. A separate experiment 'aged' the boards first by heating at 1000°C for 4 hours before testing the thermal conductivity from room temperature to 400°C once again. The experimental results were compared with three ...