Using the transient plane source (TPS) technique, the authors investigated the thermal properties of a series of yttria-stabilized zirconia (YSZ) thermal barrier coatings (TBCs). The YSZ coatings had varying amounts of impurities (Zr, Y, Si, Al oxides) and the amount of impurity affected the post-spray properties of the coating. TBCs are exposed to high temperatures during their regular operation, which can lead to the degeneration of the coating if the ...
Through the dispersion of graphite nanoplatelets in a silicone matrix and mechanical mixing, graphite nanoplatelet/silicone composites were prepared. These composites were subsequently analyzed by the transient plane source (TPS) technique in order to determine thermal conductivity. DSC and XRD were used to further characterize the composites....
Through the use of wood shavings as a filler for sand concretes, the authors have been able to improve the thermal properties of the prepared concrete as well as reuse a waste product. The previously used concrete had a higher thermal conductivity and higher density, and through the addition of wood shavings to the concrete mixture, the density and thermal conductivity of the composites have been lowered. The transient plane ...
In this article, the authors look at and compare the different methods that can be used for the measurement of thermal conductivity of nanofluids. These methods include THW and TPS among other transient and steady-state methods. This was investigated due to the large differences in thermal conductivity that were being reported for the same nanofluid from different laboratories around the world. It was determined that the system/method used the ...
Yttria-stabilized zirconia (YSZ) powders containing varying amounts of SiO2 and Al2O3 impurities were plasma sprayed onto metallic substrates and subsequently investigated. The authors were interested in how the impurities affected sintering rates, thermal conductivity, linear contraction, and pore size and architecture among other things. The YSZ coatings were heat treated at 1400°C for 10 hours and then analyzed for the properties mentioned above. A machine was used to measure the ...
