The present study used the transient plane source (TPS) technique to measure the thermal conductivity of a series of AlSi7 metal foams prepared by the powder metallurgical route. The main difference between the different foam samples was their density, which led to a change in thermal conductivity. In addition to measuring thermal conductivity, the TPS sensor was used to detect in-homogeneities by placing it on each face of a cube ...
Using the transient plane source (TPS) technique, the thermal conductivity and thermal diffusivity of concrete and wood samples were measured at elevated temperatures. The measured values are compared to established literature values and show good agreement....
Surfactants are often used in nanofluids to help improve dispersion and prevent aggregation of the resident nanoparticles. In this study, the researchers used the transient plane source (TPS) technique to measure the thermal conductivity of a variety of nanofluids with different surfactants of varying concentrations, at different temperatures and pH values. For surfactants, thermal conductivity stabilizes after the addition of a certain concentration of that surfactant. Strongly acidic and alkaline ...
A variety of metallic hollow sphere structures were prepared with different metals, values for diameter and shell thickness and their densities were predicted using analytical/empirical models. From these densities, admitted scaling laws are used to predict thermal conductivity. The predicted values for thermal conductivity are then compared to experimental values for the same structures, as determined by the transient plane source (TPS) technique....
In this study, three series of high-volume fly ash (HVFA) mortars and concretes were studied using the transient plane source (TPS) technique. Each series of sample contained varying weight % of fly ash from 0 to 75%. The three sample sets were prepared by different laboratories and the results were compared. Thermal conductivity and specific heat capacity were measured, and the authors detailed their method of doing this. It was determined that the ...
