Thermal Conductivity Paper Database

Search academic papers below:

Recommended Papers for: Temperature

Total Papers Found: 136

Development of transport properties characterization capabilities for thermoelectric materials and modules 

Thermoelectric (TE) generators have very important applications, such as emerging automotive waste heat recovery and cooling applications. This study investigates how thermal conductivity, seebeck coefficient, and resistivity of bismuth telluride changes with increasing isothermal aging. The thermal conductivity was tested with the Transient Plane Source (TPS) method. Both bismuth telluride n and p type were tested for 2 wk, 8 wk, 6 mo, 1 yr, and 2 yr of isothermal aging at 240 degrees Celsius. The ...

Author(s): , , ,

In-situ synthesis and attachment of colloidal ZnO nanoparticles inside porous carbon structures 

This study investigates the properties of a material to be used as an energy storage medium that can use energy stored from the summer months, and then release it during the winter. The proposed material uses a graphite foam, with ZnO coatings with a flower like morphology, to house a sugar alcohol phase change material (PCM). The thermal conductivity of the material was measured using a transient plane source (TPS) ...

Author(s): , , , , , , , ,

Low thermal conductivity and enhanced thermoelectric performance of nanostructured Al-doped ZnTe 

This article investigates the effect of aluminum doping on the thermal conductivity and other thermoelectric properties of nanostructured Zn1•XAlXTe (0 ≤ X ≤ 0.15) for a temperature range of 300 K – 600 K. The thermal conductivity was measured using the transient plane source (TPS) technique by a thermal constants analyzer. It was found that with increasing doping of aluminum, the thermal conductivity decreased, and with increasing temperature thermal conductivity also decreased. The decreasing of thermal ...

Author(s): , , , ,

Preparation and thermal characterization of composite -oeParaffin/Red Brick- as a novel form-stable of phase change material for thermal energy storage 

This study is to determine the thermal properties of a paraffin/red brick composite to determine its viability as a form-stable phase change material. Extended graphite was also added to the composite to improve its thermal conductivity. The thermal conductivity for this material was measured using a transient plane source (TPS) method. By adding the paraffin, the thermal conductivity of the composite increase, also by adding extended graphite the thermal ...

Author(s): , , , ,

Simultaneous measurement of thermophysical properties of tissue-mimicking phantoms for high intensity focused ultrasound (HIFU) exposures 

High intensity focused ultrasound (HIFU) is a new noninvasive method for treating certain tumors. Tissue mimicking phantoms are used to test HIFUs because it provides real time visualization of HIFU induced lesion evolution, and can calibrate the HIFU transducers. This study investigates the thermophsyical properties of egg white phantoms at room temperature, and varying concentrations of egg white. Measurements of thermal conductivity, diffusivity, and specific heat were taken using a ...

Author(s): , , , ,