The purpose of this study is to demonstrate the ability of a transient plane source (TPS) method to measure thermal conductivity, thermal diffusivity, and volumetric heat capacity. Four samples were tested standard steel, linear low-density polyethylene (LLDPE), LLDPE with 5 wt% graphite composite, and LLDPE with 15 wt% graphite composite. Steel had the highest thermal conductivity because steel has more free electrons then the other materials. LLDPE had a lower thermal conductivity ...
The Transient Plane Source (TPS) Technique measures the thermal conductivity, thermal diffusivity, and specific heat of solids and liquids. An electrically conducting double spiral nickel sensor pulses a current through a sample which increases its temperature, while simultaneously recording the length of time it took for the sample to heat up. This study, researchers tested the thermal properties of various materials and determined that anisotropy must be considered when these ...