Join us at the International Thermal Conductivity Conference (ITCC) and the International Thermal Expansion Symposium (ITES).

Thermal Conductivity Paper Database

Search academic papers below:

Recommended Papers for: Electrical Conductivity

Total Papers Found: 31

Characterisation of graphite nanoplatelets and the physical properties of graphite nanoplatelet/silicone composites for thermal interface applications

Through the dispersion of graphite nanoplatelets in a silicone matrix and mechanical mixing, graphite nanoplatelet/silicone composites were prepared. These composites were subsequently analyzed by the transient plane source (TPS) technique in order to determine thermal conductivity. DSC and XRD were used to further characterize the composites....

Author(s): , , , ,

Direct measurement of through-plane thermal conductivity of partially saturated fuel cell diffusion media

This thesis looked at the relationship between thermal conductivity and compression and saturation in three different fuel cell diffusion media (DM). The stress-strain relationship of the materials was investigated using an optical microscope, and thermal conductivity was measured by a thermal constants analyzer. A theoretical model of the maximum through-plane thermal conductivity was developed as a function of compression and saturation....

Author(s):

Thermally conductive, insulated polyimide nanocomposites by AlO(OH)-coated MWCNTs

In this paper, a thermally conductive insulated inorganic nanolayer of AlO(OH) was coated onto the surface of multi-walled carbon nanotubes (MWCNTs) to create a novel thermally conductive material. The coating of MWCNTs with this inorganic layer can effectively avoid the formation of electrically conductive networks in the Pi matrix and provides excellent thermal (conductivity) properties....

Author(s): , , , , , , ,

Thermal Conductivity of Carbon Nanofibre-Polypropylene Composite Foams

The present study look at the creation of unfilled and carbon nanofibre (CNF)-filled polypropylene (PP) foams, and their subsequent testing of thermal and mechanical properties. The testing of thermal properties was accomplished by the TPS Technique and determined that when using up to 20 wt.% CNF as filler there was no increase in thermal conductivity of any of the sample foams. Therefore it was decided that it was the foamed ...

Author(s): , , , , , ,

Latex and two-roll mill processing of thermally-exfoliated graphite oxide/natural rubber nanocomposites

Thermally Exfoliated Graphite Oxide (TEGO) was mixed with natural rubber (NR) using a two-roll mill but the mixing of the TEGO with the NR didn't proceed as expected. Therefore the researchers had to modify the procedure and decided to pre-mix the TEGO and NR in an ultrasonically-assisted latex co-coagulation process followed by two-roll milling resulted in significant improvement in the thermal and electrical properties of the nanocomposite compared to the ...

Author(s): , , , ,