The purpose of this study is to demonstrate the ability of a transient plane source (TPS) method to measure thermal conductivity, thermal diffusivity, and volumetric heat capacity. Four samples were tested standard steel, linear low-density polyethylene (LLDPE), LLDPE with 5 wt% graphite composite, and LLDPE with 15 wt% graphite composite. Steel had the highest thermal conductivity because steel has more free electrons then the other materials. LLDPE had a lower thermal conductivity ...
Thermal conductivity is one of the most important properties of fuel and cladding material. In this study, the thermal conductivity of uranium and T91 steel were measured using the transient plane source (TPS) method. Results showed that the thermal conductivity of T91 increased gradually to a point, then decreased. Fast reacting cladding materials require high thermal conductivities, and T91 was found to have higher conductivities than other commercial materials. As ...
A novel technique was used in this research article, to introduce a hybrid mesh to a polymer composite within bipolar plates, for proton exchange membrane fuel cells (PEMFCs). The mesh added was copper or aluminum based, to allow for an increased thermal conductivity of the PEMFCs. Experimental testing confirms this theory, as the copper-meshed hybrid polymer composite showed a thermal conductivity of 30.0 W/mK, while the aluminum-meshed hybrid polymer composite ...
