This study looked at the use of two different fillers to improve the thermal properties of an epoxy resin. The two fillers were multi-walled carbon nanotubes (MWCNTs) and aluminum nitride (AlN). Through the use of poly(glycidyl methacrylate) (PGMA) and a zirconate coupling agent the MWCNTs and AlN particles respectively were added to the epoxy resin. Through the use of 1 vol.% MWCNT and 25 vol.% AlN the researchers were able to ...
PANI/tetradecanol/MWNTs composites were prepared via in-situ polymerization and analyzed for their use as phase change materials. The MWNTs were randomly dispersed in the composite and it was determined that the PCM was form-stable and that phase separation of the MWNTs and PANI/tetradecanol wouldn't occur....
A 3D carbon nanotube (CNT) network is explored and how potassium or iodine doping can affect the thermoelectric properties of this network. Through in-situ nanoscaling, this CNT network was combined with polyaniline (PANI) and increased the thermoelectric performance of PANI while maintaining the flexible structure of the 3D CNT network. This composite has one of the lowest thermal conductivities of any reported CNT materials....
The authors observed a remarkable synergistic effect when they used multi-graphene platelets (MGPs) and multi-walled carbon nanotubes (MWCNTs) together in an epoxy composite. The use of these two fillers together increased the tensile strength, thermal conductivity, solubility and compatibility relative to the various individual components. The 1D nanotubes inhibit the aggregation/stacking of the platelets and thus result in high contact area between MGP/MWCNT and the polymer matrix....
Single and multi walled carbon nanotubes were prepared using the floating catalyst chemical vapor deposition method and were subsequently added to polymethylmethacrylate (PMMA) to generate a composite material. The thermal properties of these composite materials were studied. The effect of acid treatment on these composite materials was also studied and was found to decrease the thermal conductivity of the materials. The addition of CNTs to the PMMA resulted in an ...