The authors present a method of producing Cu2CdSnSe4 quaternary nanocrystals using a colloidal synthesis route that could be used for future industrial synthesis. The nanocrystals prepared showed great potential for use as a thermoelectric material due to their high thermoelectric figure of merit (up to 0.71) resulting from a high electrical conductivity and low thermal conductivity. The authors believed that these properties could be further tuned in order to increase ...
Author(s): Alejandro PC)rez-RodrC-guez, Alejandro Perez-RodriB-guez, Alexey Shavel, Andreu Cabot, Andrew Fairbrother, Doris Cadavid, Joan Daniel Prades, Joan Ramon Morante, Jordi Arbiol, Maria Ibanez, Nuria GarcC-a-CastellC3, Nuria GarciB-a-Castello, Reza Zamani, Victor Izquierdo-Roca, Wenhua Li
The authors have dispersed mesoporous silica (MPSiO2) nanoparticles in water and determined the thermal conductivity for each of the resulting nanofluids. It was determined that the thermal conductivity of the nanofluid was greater than that of water, so these nanofluids have potential for use in heat exchanger applications....
Author(s): B. Palm, E. B. Haghighi, M. Muhammed, M. S. Toprak, M. Saleemi, N. Nikkam, R. Khodabandeh, S. Li
A nanoparticle-enhanced phase change material (NePCM) is prepared by the dispersal of carbon nanotubes in 1-dodecanol. The objective of this experiment was to determine if the addition of nanoparticles could increase the thermal conductivity of the base PCM while resulting in a NePCM that would still have the required properties of a functional PCM. It was found that the thermal conductivity was enhanced through the addition of the carbon nanotubes; ...
Author(s): Ke-Fa Cen, Li-Wu Fan, Yi Zeng, Yu-Qi Xiao, Zi-Tao Yu
Polystyrene/multi-walled carbon nanotube (PS/MWCNT) nanocomposite foams were prepared in order to determine if these foams exhibited a reduced thermal conductivity in comparison to pristine polystyrene foam. The thermal conductivity of foams can be broken down into three modes of conduction: gas conductivity, solid conductivity, and radiative conductivity. The PS/MWCNT foams had decreased gas and radiative conductivities in comparison to the pristine PS foam; however, the solid conductivity ...
Author(s): Chul B. Park, Mehdi Saniei, Minh-Phuong Tran, Pengjian Gong, Petra Potschke, Piyapong Buahom
Seven different types of nanocrystals were used as additives in aluminosilicate bricks to determine if this is a valid method of decreasing the thermal diffusivity of the bricks for use as plant coating in the iron and steel industries. Each type of nanocrystal was added in concentration percentages of 0.5, 1, and 2 wt. % to determine the effect of concentration on thermal transport and physical properties. It was found that all of the ...
Author(s): Barbara Federica Scremin, Caterina Lorusso, Claudia Carlucci, Emanuela Filippo, Francesca Baldassarre, Francesca Conciauro, Gaetano Terranova, Giuseppe Ciccarella, Paolo Maria Congedo, Rosaria D'Amato, Viviana Vergaro
