Temperature & Environment Options

Thermal Conductivity Laboratory Instrument TPS Tube Furnace

TPS Tube Furnace

This furnace offers the ability to test under vacuum or backfilled pressure conditions up to 1000°C. The tube furnace comes with software for automatic temperature control and scheduling of measurements.

Temperature: RT to 1000°C 
Temperature precision: better than 0.1 °C 
Tube diameter: 50 mm or 150 mm 
Optional testing cells: powders and liquids 
* Requires use of dry vacuum pump and valves; can be supplied if needed.

Thermal Conductivity TPS Accessories Standard Oven

TPS Standard Oven 1

This is a forced air oven, offering automated rapid heating and recovery along with excellent temperature uniformity. 

Temperature: RT to 300°C in air environment. 
Multi-sample testing accessories: x 2, x 3 and 4 samples
Optional testing cells: Ni cell, powders, and liquids 
Suggested accessories: High-temperature TPS sensor adapter. 

Thermal Conductivity TPS Accessories Furnace

TPS Standard Furnace 2

The standard furnace comes with software for automatic temperature control and scheduling of measurements. High temperature measurements have never been this easy! The muffle inside the furnace creates a stable environment and minimizes the temperature gradients in the sample. Temperature: RT to 300°C in air environment. 

Temperature: RT to 500°C in air environment and 750°C in Ni insert. 
Temperature precision: better than 0.1 °C 
Multi-sample testing accessories: x 2, x 3 and 4 samples
Optional testing cells: powders and liquids 
Suggested accessories: Sample holder, cable, and sensors for high temperatures. 

Thermal Conductivity Laboratory Instrument TPS Heat Exchanger Circulator Bath

TPS Heat Exchanger with Circulating Bath

With this apparatus temperature and stability conditions are vastly improved outside of the bath circulator. The TPS PEEK-A 4-wire High Temperature Adaptor allows testing up to 300°C in vacuum and backfilled conditions. Most sample cells can be used with this device. The circulating bath comes with automatic temperature programming and scheduling of measurements. The bath can be equipped with a wide range of sample holders. 

Temperature range: -50 up to 200°C 
*Several optional circulators based on size and temperature range requirements. 
Temperature precision: better than 0.01°C 
Optional testing cells: solids, powders, and liquids 
Suggested accessories: sample holder for circulator, cable, and sensors for high temperatures. 

Thermal Conductivity TPS Accessories Thermoelectric Dry Bath

TPS Thermoelectric Dry Bath

The dry bath is a low-cost temperature environment for TPS testing from -5°C / 15°C to 100°C. This device can be used with the room temperature sensors as only the kapton portion of the sensor is exposed to temperatures.

Temperature: Option 1: -5 to 100C and Option 2: -15 to 100C. 
Temperature precision: better than 0.1 °C

Thermal Conductivity Laboratory Instrument TPS Environmental Chamber

TPS Environmental Chamber

The off-the-shelf environmental offers convenient heating and cooling in both bench top and floor models.

Temperature range: -70°C to 200°C