Tannin and lignin are organic materials that are more cost-effective than synthetic, non-renewable phenolic compounds. In this paper, tannin-lignin-formaldehyde (TLF) composites were used to synthesize thermally insulative mesoporous aerogels. A thermal analyzer measured the thermal conductivity of two TLF samples using the transient plane source (TPS) method. Results showed that the TLF aerogels had better thermal insulation properties than any other organic aerogels reported in the literature, and were well ...
Author(s): A. Szczurek, Alain Celzard, Antonio Pizzi, B. N. Kuznetsov, G. Amaral-Labat, L. I. Grishechko, V. Fierro
In this paper, cost efficient RVC foams were fabricated from household cleaning pad waste (CPW) and sucrose. A thermal analyzer measured the thermal conductivity of the RVC foams using the transient plane source (TPS) method. Results showed that the thermal conductivity of the CPW foams were significantly lower than Ultramet’s RVC foams which are highly insulative. This study proved that it is possible to reproduce low-cost carbon foams from ...
Author(s): Alain Celzard, P. Jana, V. Fierro
Lignin and phenol are inexpensive naturally derived resources that can be used to produce cost-effective organic gels. This paper aimed to examine the thermal properties of insulative organic aerogels and cryogels made from lignin and phenol. A thermal analyzer (TPS) measured the thermal conductivity of the gels using the transient plane source (TPS) method. Results showed that, as expected, thermal conductivity increased with bulk density. Cryogels were found to be ...
Author(s): A. Szczurek, Alain Celzard, B. N. Kuznetsov, G. Amaral-Labat, L. I. Grishechko, V. Fierro
This paper examined the synthesis of hyperbranched polymers (HBPs) and how their hydroxyl end groups help form networks in tannin-based foams. A thermal analyzer (TPS) measured the thermal conductivity of the foam samples using the transient plane source (TPS) method. Results showed that modified foams retained their thermal insulation properties even with the addition of oligomeric precursors. This gives good indication that the addition of hydroxyl-terminated oligomeric precursors to tannin ...
Author(s): Alain Celzard, Antonio Pizzi, D. Le Nouen, H. A. Essawy, K. Rode, L. Delmotte, V. Fierro, X. Li
The authors set out to prepare cellular vitreous carbon (CVC) foams with varying thermal and physical properties. This was accomplished by using tannin-based resin modified by different isocyanates in varying amounts. Three different experimental procedures were used to prepare foams with different physical and thermal properties. Physical properties of the foams studied include density, as well as pore volume, pore size and cell diameter. The transient plane source (TPS) technique ...
Author(s): Alain Celzard, Antonio Pizzi, F. L. Braghiroli, M. C. Basso, V. Fierro, X. Li
