Join us at the International Thermal Conductivity Conference (ITCC) and the International Thermal Expansion Symposium (ITES).
Nanoparticle suspensions were prepared in two PCMs to determine the effect of the addition of nanoparticles on thermal conductivity and expediting freezing. The base PCMs used were cyclohexane and eicosane, and copper oxide nanoparticles were suspended in these hydrocarbons to produce nano-enhanced PCMs (nePCMs). The enhancement of thermal conductivity and expedited freezing were investigated by analytic, experimental, and numerical methods. The thermal conductivity in the liquid phase was significantly enhanced ...
The incorporation of phase change materials (PCMs) into concrete bridge decks shows promise as a method of decreasing freeze/thaw cycling in bridge decks. The authors have conducted a study to determine the best carrier to be used for the incorporation of PCMs into concrete, as well as the effects of the incorporation of the carriers and PCMs on strength and thermal properties of mortars. Four different PCMs (PCM6, PT4, ...
The thermal and rheological properties of n-octadecane, a phase change material, with dispersed TiO2 nanoparticles were investigated at varying temperatures. The properties were investigated in both the solid and liquid phases, with varying mass fractions of TiO2 nanoparticles. The thermal conductivity was found to be enhanced in all of the composite samples when compared to the thermal conductivity of pure n-octadecane, and the maximum enhancement occurred at 3 wt. % TiO2 in ...
The authors present a review of the thermal properties of graphene, and present one example of a practical application of graphene in thermal management, as an additive to phase change materials. It was found that the use of liquid-phase-exfoliated graphene as a filler in phase change materials has potential to enhance the thermal management in high-power battery packs. The results also indicated that graphene had the ...
Molten selenium, silver, cadmium, and tin were used to prepare a-Se, and a-Se98M2 (M = Ag, Cd, and Sn) alloys in order to determine the thermo-physical properties of these materials using the transient plane source technique. In order for these alloys to be used in industrial applications such as phase change optical storage, photo electrochemical solar cells, and holographic recording systems, among others, their thermal transport properties needed to be ...
