Join us at the International Thermal Conductivity Conference (ITCC) and the International Thermal Expansion Symposium (ITES).
In this paper, polyamide (PA, composed of at least 60% renewable materials) was used as a polymer matrix to prepare PA-hexagonal boron nitride (hBN) polymer composites with varying hBN contents. Two different PA samples were used in this study: a low viscosity grade PA (PA-30), as well as a high viscosity grade PA (PA-90). The composite polymers were tested to evaluate their thermal, physical, and mechanical properties. It was concluded that ...
Raw multi-walled carbon nanotubes (r-MWCNTs) and Cu nanoparticles are dispersed in an epoxy matrix in varying quantities to create composite polymers with enhanced thermal conductivities. A study was then conducted to determine if the boundary thermal contact resistance could be reduced by increasing the thermal conductivity. The boundary thermal contact resistance was found to be approximately constant across all samples containing the copper nanoparticles. The boundary thermal contact resistance was ...
Polyactic acid (PLA)-micro hexagonal boron nitride (hBN)-graphene nanoplatelet (GNP) polymer composites were prepared, and the effects of varying filler contents on the thermal and mechanical properties of the polymer composites were investigated. It was determined that the addition of the GNPs resulted in a decrease in thermal conductivity in comparison to a PLA-hBN composite unless the GNP:hBN ratio was 1:1, where the thermal conductivity was equal to that ...
