Join us at the International Thermal Conductivity Conference (ITCC) and the International Thermal Expansion Symposium (ITES).
Passive cooling is a method of dissipating heat rejected by electronic devices, and when associated to a phase change can be very effective. Phase change materials (PCMs) are widely used for thermal storage applications due to their ability to store and release large amounts of energy. Paraffin waxes also exhibit desirable characteristics, such as high latent heat and low thermal conductivity. This article looks at four nano-PCMs, obtained by seeding ...
The phase behavior of polymeric materials is understood through glass transition temperature. It is a temperature boundary above which the polymeric material is soft and viscous, and becomes hard, brittle, and glassy below this temperature. In the present work, PS/PMMA immiscible polymer blend samples are studied at different compositional ranges. Thermal transport properties of PS/PMMA polymeric blends were measured , from room temperature to 120°C. Variation in thermal conductivity ...
Controlling the temperature of electronics under harsh conditions is important for vehicular, aerospace, and other industrial applications. Phase change materials (PCMs), such as paraffin, use latent thermal energy storage (LTES) to store large amounts of latent heat over small temperature ranges, and are being investigated for use in industrial sectors. However, PCMs have low thermal insulation capabilities so porous matrices with low thermal conductivities are often used to decrease the ...
This paper focused on determining the thermal conductivity of multiwalled carbon nanotubes (MWCNTs) and carbon nanofibers (CNFs) that were dispersed throughout n-octadecane as phase change materials (PCMs). The Thermal Constants Analyzer TPS measured the thermal conductivity of the n-octadecane samples at solid and liquid phases using the transient plane source (TPS) method. Results showed that the thermal conductivity of the solid phase n¬-octadecane/MWCNTs samples increased with nanotube concentration. ...