Diamond is an extremely conductive material that would be ideal for dissipating heat in microelectronics if it were not for its high price tag. In this study, cost effective copper- and chromium-diamond composites (uncoated (Cu/D), Cu-coated (Cu/CuD), and Cr-coated (Cu/CrD)) were produced to determine their potential use in heat sink applications. A Thermal Constant Analyzer measured the thermal conductivity of the matrix and composite samples using the ...
Author(s): Fazal Ahmad Khalid, Kabeer Raza, Muhammad Zain-ul-abdein, Tarek Mabrouki
Intumescent paints protect steel structures from fires by creating insulative foams when heated above a critical temperature. This paper examines the fire resistance capabilities of phenyl silicone coatings in comparison to intumescent paints. A thermal constant analyzer measured the thermal conductivity of the silicone-based coatings using the transient plane source (TPS) technique. Results showed that the silicone/modifier coating consistently had lower thermal conductivities than the silicone coating. At heightened ...
Author(s): B. Gardelle, S. Bourbigot, S. Duquesne, V. Rerat
The transient plane source (TPS) technique has a wide range of applications because of its capability to test solids, liquids, powders, and anisotropic materials over a range of sizes. Thermal properties of thin films and coatings can also be characterized using the TPS method if the samples are placed between the sensor and a bulk background. To minimize errors with the TPS method, use identical materials on each side of ...
Author(s): H. Nagai, T. Okutani
Seven different types of nanocrystals were used as additives in aluminosilicate bricks to determine if this is a valid method of decreasing the thermal diffusivity of the bricks for use as plant coating in the iron and steel industries. Each type of nanocrystal was added in concentration percentages of 0.5, 1, and 2 wt. % to determine the effect of concentration on thermal transport and physical properties. It was found that all of the ...
Author(s): Barbara Federica Scremin, Caterina Lorusso, Claudia Carlucci, Emanuela Filippo, Francesca Baldassarre, Francesca Conciauro, Gaetano Terranova, Giuseppe Ciccarella, Paolo Maria Congedo, Rosaria D'Amato, Viviana Vergaro
Using the transient plane source (TPS) technique, the authors investigated the thermal properties of a series of yttria-stabilized zirconia (YSZ) thermal barrier coatings (TBCs). The YSZ coatings had varying amounts of impurities (Zr, Y, Si, Al oxides) and the amount of impurity affected the post-spray properties of the coating. TBCs are exposed to high temperatures during their regular operation, which can lead to the degeneration of the coating if the ...
Author(s): A. Cipitria, I. O. Golosnoy, L. Xie, M. R. Dorfman, S. Paul, T. W. Clyne