Join us at the International Thermal Conductivity Conference (ITCC) and the International Thermal Expansion Symposium (ITES).
Chemically modified graphene (CMG) was obtained by combining aminopropyllsobutyl polyhedral oligomeric silsesquioxane (NH2-POSS) and hydrazine monohydrate to functionalize graphene oxide (GO). CMG and polyimide (PI) were combined to create the CMG/PI nanocomposite. The properties of this nanocomposite were obtained using a variety of methods. The thermal conductivity measurements were performed using a TPS instrument by utilizing the transient plane source (TPS) method. It was found that the thermal ...
This article explored the recent discoveries that have been made regarding the thermal conductivity of polymeric nanocomposites. The thermal conductivities were found using several methods: comparative method, laser flash method, stable state method, the "two thermometer-one heater" method, line-source method and transient plane source (TPS) technique. The TPS technique was used measure the thermal transport properties of nanocomposites in a copolymer matrix....
This article explored polymeric composites and their thermal characteristics, such as their high thermal conductivity and excellent thermal stability. These characteristics are highly desired as they can be widely applied in the electronics, medical, manufacturing, etc., industries. The thermal conductivities were studied using a variety of sources, including the transient plane source (TPS). After conducting several studies on the thermally conductive polymeric composites, it was determined that there were some ...
The article investigated the hybridization of multi wall carbon nanotubes (MWCNTs) with filler in polymer matrix composites (PMC) which is one of the techniques used to combine different properties of fillers to make more unique composites. The properties of two different hybrid filler composites (Chemical Vapour Deposition (CVD) hybrid filler and physically hybrid filler) were then studied. The thermal conductivity was measured through the use of a Thermal Constant Analyzer ...
Thermally conductive polymers are the most effective and economic methods of removing heat accumulation from microelectronics. In the present study, m-xylylenediamine (MPDA) was used as a curing agent for the epoxy matrix and analyzed for its effect on the thermal conductivity of the composite. Thermal conductivity was measured with a thermal analyzer using the transient plane source (TPS) method. When filling content of the multiwall carbon nanotubes (MWNTs) was 2%wt, ...
