Join us at the International Thermal Conductivity Conference (ITCC) and the International Thermal Expansion Symposium (ITES).

Thermal Conductivity Paper Database

Search academic papers below:

Recommended Papers for: Thermogravimetric analysis (TGA)

Total Papers Found: 20

Thermal Characterization of Lauric–Stearic Acid/Expanded Graphite Eutectic Mixture as Phase Change Materials

Expanded graphite (EG) was added to lauric acid (LA)-stearic acid (SA) phase change materials to enhance their thermal conductivities. The PCMs were prepared in varying mass fractions of LA and SA, and 10 wt. % of EG was added. The phase change temperature and phase change enthalpy were determined by DSC, while the thermal conductivities, and thermal stabilities of the PCMs were determined by the transient plane source and thermogravimetric analysis, ...

Author(s): , , ,

Preparation of low-density polyethylene/low-temperature expandable graphite composites with high thermal conductivity by an in situ expansion melt blending process

Low-temperature expandable graphite (LTEG) was blended into low-density polyethylene (LDPE) to prepare composite materials with an enhanced thermal conductivity in comparison to pure LDPE. The thermal conductivity of a composite containing 60 wt. % LTEG was found to be increased by a factor of 23 in comparison to the pure polymer. The LTEG was also found to decrease the melting temperature and degree of crystallinity of the LDPE, and the composites were also ...

Author(s): , , ,

Thermal properties and moisture absorption of nanofillers-filled epoxy composite thin film for electronic application

The effects of the addition of three different fillers to a polymer matrix on the thermo-physical properties of the resulting composites were investigated by the authors. Boron nitride, synthetic diamond, and silicon nitride were used as the fillers (up to 2 vol. %), and it was found that their addition did increase the thermal conductivity relative to that of the pure epoxy matrix. Furthermore, it was determined that the thermal conductivities of ...

Author(s): , ,

High thermally conductive PLA based composites with tailored hybrid network of hexagonal boron nitride and graphene nanoplatelets

Polyactic acid (PLA)-micro hexagonal boron nitride (hBN)-graphene nanoplatelet (GNP) polymer composites were prepared, and the effects of varying filler contents on the thermal and mechanical properties of the polymer composites were investigated. It was determined that the addition of the GNPs resulted in a decrease in thermal conductivity in comparison to a PLA-hBN composite unless the GNP:hBN ratio was 1:1, where the thermal conductivity was equal to that ...

Author(s): , , ,

Thermal properties of green alumina porcelain

The thermal properties, as well as bulk density, and mass loss of alumina porcelain were determined as a function of firing temperature. It was found that after sintering at 1320 ºC, the thermal conductivity and thermal diffusivity increased by ~700% and ~400%, respectively....

Author(s): ,