Thermal Conductivity Paper Database

Thermtest has compiled the world’s largest thermal conductivity academic paper database. The research paper database is dedicated to the Transient Plane Source (TPS), Transient Hot Wire (THW), Transient Line Source (TLS), and Guarded Heat Flow Meter (GHFM). These techniques offer a wide range of applications, which is represented by more than 1000 papers represented in the database! Search academic papers below:

Recommended Papers for: glass

Total Papers Found: 26

Composition dependence of some thermo-physical properties of multi-component Se78-xTe20Sn2Bix (0 < x < 6) chalcogenide glasses

The multi-component quaternary materials of the Se78-xTe20Sn2Bix (x = 0, 2, 4, 6) chalcogenide glasses system were synthesized with varying bismuth (Bi) ...

Author(s): ,

Thermo-physical properties of multi-component Se78-xTe20Sn2Pbx chalcogenide glasses

The Transient Plane Source (TPS) technique was used to evaluate the thermal transport characteristics (such as thermal conductivity, thermal diffusivity, specific heat per unit volume) in multi-component Se78-x

Author(s): ,

Simultaneous measurements of thermal conductivity and diffusivity of Se(85-x)Te(15)Sb(x) (x = 2, 4, 6 and 10) chalcogenide glasses at room temperature

In this study, the transient plane source (TPS) technique was used to measure the thermal conductivity and thermal diffusivity of Se85-xTe15Sbx

Author(s): , ,

A study of some thermophysical parameters in glassy Se80Te20 and Se80Te10M10 (Cd, In, and Sb) alloys

Selenium (Se) and tellurium (Te) based glasses have unique physical and chemical characteristics that can be manipulated with by the addition of metal alloys. In this study, the thermophysical properties ...

Author(s): ,

Physical study of room-temperature-cured epoxy/thermally reduced graphene oxides with various contents of oxygen-containing groups

Epoxy nanocomposites containing thermally reduced graphene oxides (TRGs) with different oxygen contents were prepared and their mechanical and thermal properties were investigated. It was found that increasing the number of ...

Author(s): , , , , , , ,

Effective thermal conductivity and diffusivity of GeSeSb glasses measured simultaneously as a function of temperature and fit to empirical equations

The effective thermal conductivity and thermal diffusivity was measured for chalcogenide glass samples of the formulation Ge30-xSe70Sbx (x = 10, 15, 20, 25). It was found that both the effective thermal conductivity and ...

Author(s): , , , , ,

Thermal transport, thermomechanical, and dielectric properties of chalcogenide Se98–xAg2Inx (x = 0, 2, 4, 6) system

The influence of In content in the Se98-xAg­2Inx (x = 0, 2, 4, 6) system of chalcogenide glasses on the physical properties of the glasses were investigated by the authors. The maximum thermal ...

Author(s): ,

Study on effective thermal conductivity of zinc sulphide/poly(methyl methacrylate) nanocomposites

Zinc sulfide nanoparticles were embedded in a poly(methyl methacrylate) matrix to prepare a  nanocomposite polymer with a higher thermal conductivity than the pure polymer. It was determined by TEM ...

Author(s): , ,

Influence of CdS Nano Additives on the Thermal Conductivity of Poly(vinyl chloride)/CdS Nanocomposites 

CdS nanoparticles were dispersed in varying quantities into a PVC matrix and the effective thermal conductivities of the produced nanocomposites were investigated at temperatures from 25 to 110C. It was determined ...

Author(s): ,

Evaluation of Morphological Effect on Thermal and  Mechanical Performance of PS/PMMA/CdS  Nanocomposite Systems

The thermal and mechanical properties of PS/PMMA immiscible polymer blends were investigated. The effects of the dispersion of CdS nanoparticles on these properties were also investigated. The dispersion of ...

Author(s): , ,

Enhancement of electrical, thermal and mechanical properties of carbon nanotube additive Se85Te10Ag5 glassy composites

A chalcogenide glass was prepared and doped with carbon nanotubes (CNTs) in an effort to increase the electrical and thermal conductivity of the glass. The glass that was used in ...

Author(s): , , , ,

Temperature dependence of the thermal conductivity and thermal diffusivity of treated oil-palm-fiber-reinforced phenolformaldehyde composites

The effective thermal conductivity and thermal diffusivity of polymer composites consisting of phenolformaldehyde matrix and oil palm empty fruit bunch (OPEFB) fibers were determined using the transient plane source method. ...

Author(s): , , , ,

Thermophysical properties of Zr–Cu–Al metallic glasses during crystallization

Zr-Cu-Al metallic glasses were formulated with differing compositions to determine their thermophysical properties. It was determined that by decreasing the zirconium content of the metallic glass, the thermal conductivity can ...

Author(s): , ,

Engineering thermal and mechanical properties of flexible fiber-reinforced aerogel composites

The authors present a method of fiber-reinforced aerogel composites by impregnation of four layers of aligned glass fibers into silica sol layer-by-layer. The effect of different fiber alignments, as well ...

Author(s): , , , , ,

The Effects of Thermophysical Properties and Environmental Conditions on Fire Performance of Intumescent Coatings on Glass Fibre-Reinforced Epoxy Composites

The reaction to fire properties of three commercial coatings designed for steel structures were investigated. The coatings in this study were covering a glass fiber-reinforced epoxy composite. It was determined ...

Author(s): , , ,