Thermal Conductivity Paper Database

Thermtest has compiled the world’s largest thermal conductivity academic paper database. The research paper database is dedicated to the Transient Plane Source (TPS), Transient Hot Wire (THW), Transient Line Source (TLS), and Guarded Heat Flow Meter (GHFM). These techniques offer a wide range of applications, which is represented by more than 1000 papers represented in the database! Search academic papers below:

Recommended Papers for: fillers

Total Papers Found: 24

Thermal Conductivity and Contact Resistance Measurements for Adhesives

Thermal adhesives that contain large proportions of high thermal conductivity filler materials are extremely useful in electronics and manufacturing. Due to the importance of these fillers it is crucial to ...

Author(s):

A Study of Thermal Conductivity of Boron-Nitride Epoxy-Matrix Composites

Thermal conductivity of neat-epoxy resin is one of the lowest among all known solid materials. A common method of increasing thermal conductivity is through the addition of filler particles with ...

Author(s): , , , ,

Thermal properties and moisture absorption of nanofillers-filled epoxy composite thin film for electronic application

The effects of the addition of three different fillers to a polymer matrix on the thermo-physical properties of the resulting composites were investigated by the authors. Boron nitride, synthetic diamond, ...

Author(s): , ,

Improved Thermal Conductivity of Poly(trimethylene terephthalate-block-poly(tetramethylene oxide) Based Nanocomposites Containing Hybrid Single-Walled Carbon Nanotubes/Graphene Nanoplatelets Fillers

Poly(trimethylene terephthalate)-block-poly(tetramethylene oxide) (PTT-PMTO) copolymer-based nanocomposites containing a combination of single-walled carbon nanotubes (SWCNTs) and graphene nanoplatelets (GNPs) as carbon nanofillers were investigated to determine their thermal ...

Author(s): , , , , ,

Graphene-Enhanced Phase Change Materials for Thermal Management of Battery Packs

The potential of graphene and few-layer graphene to be used as fillers in a paraffin wax phase change material (PCM) was evaluated. The goal was to prepare a composite PCM ...

Author(s): ,

High-electrical-resistivity thermally-conductive phase change materials prepared by adding nanographitic fillers into paraffin

Pristine and modified exfoliated graphite nanoplatelets (xGnPs and M-xGnPs, respectively) were dispersed into a paraffin wax phase change material (PCM) in an effort to raise the thermal conductivity of the ...

Author(s): , , , , ,

Thermal interface materials based on carbon nanotubes and their thermal characterization

The effects of using different fillers and the effects of filler content and particle size on the thermal properties of thermal interface materials were investigated. The most prominent enhancement in ...

Author(s): , , , , ,

Filler geometry and interface resistance of carbon nanofibres: Key parameters in thermally conductive polymer composites

The effects of intrinsic thermal conductivity, carbon filler geometry, and interface thermal resistance on the effective thermal conductivity of polymer composites were investigated. It was found that the length of ...

Author(s): , , , ,

Influence of the degree of exfoliation on the thermal conductivity of polypropylene nanocomposites

This article investigated the effects of incorporating silica layers into polypropylene nanocomposites. The influence of the silica layers on the thermal conductivity of the material is compared to the influence ...

Author(s): , , , , ,

Thermal conductivity improvement of composite carbon foams based on tannin-based disordered carbon matrix and graphite fillers

Composite carbon foams were prepared by mixing tannin-based resin with various graphite powders in an effort to improve the thermal conductivity relative to pristine carbon foams in order to use ...

Author(s): , , ,

Composites of Sulfonated Polystyrene-block-Poly (ethylene-ran-butylene)-block-Polystyrene and Graphite-Polyoxometalate: Preparation, Thermal and Electrical Conductivity

Sulfonated polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene (SPSPB) was used as a polymer matrix to create polymeric nanocomposites using graphite (G) and graphite-polyoxometalate (G-POM) as fillers. It was found that the nanocomposites had ...

Author(s):

Studies on the Preparation of Polystyrene Thermal Conductivity Composites

Through the use of thermally conductive fillers the thermal properties of polystyrene (PS) are improved significantly. The different fillers include: aluminum oxide (Al2O3), magnesium oxide (MgO), B-silicon carbide particles (...

Author(s): , , ,

Synergetic effect of thermal conductive properties of epoxy composites containing functionalized multi-walled carbon nanotubes and aluminum nitride

This study looked at the use of two different fillers to improve the thermal properties of an epoxy resin. The two fillers were multi-walled carbon nanotubes (MWCNTs) and aluminum nitride (...

Author(s): , , ,

Characterizations of CaO-B2O2-SiO2 glass-ceramics: Thermal and electrical properties

Five different glasses were created in the present study with varying compositional ratios in a CaO-B2O2-SiO2 (CBS) System and the thermal and dielectric properties of these glasses were ...

Author(s): , , ,

Synergetic effects of graphene platelets and carbon nanotubes on the mechanical and thermal properties of epoxy composites

The authors observed a remarkable synergistic effect when they used multi-graphene platelets (MGPs) and multi-walled carbon nanotubes (MWCNTs) together in an epoxy composite. The use of these two fillers together ...

Author(s): , , , , , , ,